Pool Leak Detection and Repair Cost Calculator
Pick your pool and what it is doing, and this gives you the flat detection fee plus the range for the repair that matches your symptom. Both come from the published pricing page, and neither asks for an email.
Two things to understand before you use it.
The detection fee is flat and separate. It is charged whether or not a leak is found, because what you are buying is the answer. Bundling detection into a repair price creates an obvious incentive problem: the person testing your pool should have no reason to prefer one diagnosis over another.
The repair number is a range until the leak is located. A skimmer leak and a broken return line under a poured deck are a thousand dollars apart, and any company quoting a firm repair price before testing is guessing or selling.
If you do not know the symptom yet
Pick the first option. You will see the detection fee on its own, which is the honest starting number. The bucket test post walks through the free 24-hour test that tells you whether you have a leak at all, and the pages below narrow down where it is.
What each answer tells us
- Pool, spa, and features determines how much plumbing there is to test. A spa adds its own suction and return lines; water features add more.
- The symptom is the strongest clue you can give:
- Stops at the skimmer line is the single most common leak on Florida gunite pools. See skimmer leaks.
- Stops at the light points at the niche or the conduit behind it. See pool light leaks.
- Only when the pump runs means pressure-side plumbing; only when the pump is off means suction-side. That distinction is worth more than any other single observation. See losing water only when the pump runs.
- A visible crack may or may not be the leak, and the gunite crack page explains which cracks matter.
- What is over the plumbing is the biggest cost driver on an underground repair. Pavers lift and relay cheaply. Poured concrete has to be cut and patched. A screen enclosure footing over the line is the expensive case.
- More than one leak is common enough to be worth asking about. Pools that have been losing water for a while frequently have two.
What the detection visit actually includes
Pressure testing each plumbing line individually, dye testing the shell, fittings, skimmer throat, light niche, and returns, and electronic leak location where the first two do not settle it. Then a written report of what was found and a separate written repair quote you can take to anyone.
Water loss, and what is normal here
Before spending anything, check whether you actually have a leak. In the Treasure Coast summer, evaporation alone can account for a quarter inch a day on an uncovered pool, somewhat less under a screen enclosure. Add splash-out and backwashing and a pool can look like it is leaking when it is not.
The normal water loss post covers the numbers and the bucket test settles it in a day for free.
Coverage includes Port St. Lucie, Fort Pierce, Jensen Beach, Stuart, Palm City, Port Salerno, and St. Lucie West.
What will finding and fixing my pool leak cost?
Four questions. The detection fee is flat and published; the repair range is the one that matches your symptom. Both come straight from the pricing page.
The detection fee is flat and is charged whether or not a leak is found, because you are paying for the answer. Repairs are quoted separately in writing after the leak is pinpointed, and nothing is done without your approval. If you do not know the symptom, pick the first option and you will see the detection fee alone, which is the honest starting number.
Send this estimate to the quote formAn estimate, not a quote. The repair number is firm only after the leak is located, and a range now is more honest than a number that has to change later.
Frequently Asked Questions
How much does pool leak detection cost in Port St. Lucie?
A flat $250–$400 for a standard residential in-ground pool, $350–$500 with an attached spa, and $400–$550 with spa and water features. The fee covers the full diagnostic visit: pressure testing the plumbing, dye testing the shell and fittings, and electronic leak location where it is needed.
Why is detection charged separately from repair?
Because they are different work, and bundling them creates an incentive to find an expensive repair. A flat detection fee means the person testing your pool has no reason to arrive at any particular answer, and you get a written repair quote you can take anywhere.
What does pool leak repair cost?
Skimmer repairs $300–$800, light and conduit repairs $300–$650, underground plumbing $500–$1,500 and up depending on depth and deck, and structural crack repair from about $75 per linear foot with larger injection or staple work at $700–$1,500 and up.
Do you charge if you cannot find a leak?
Yes, and that is the honest answer. The fee pays for the testing, and a pool that tests tight is a genuinely useful result: it means the water loss is evaporation, splash-out, or a feature running, and you have saved yourself from chasing a leak that is not there.
Port St. Lucie Leak Detection